Barrier

The automatic barrier is used to regulate traffic, secure spaces, control access and optimize traffic management.

We offer a variety of automatic barriers to meet everyone’s needs. Both in terms of price (from entry-level to ultra personalized), accessories (simple or with signage, reinforcement, access control…) and use (private, collective, intensive).

Let’s introduce our best-seller: The barrier B 680H

Safe performance and reliability

The B680H has a Hybrid heart which, together with its “everlasting” springs, allows it to exceed 2,000,000 cycles of continuous-use, raising 8 m beams in less than 6 seconds, in total safety, thanks to the reverse on contact feature.

Removable trunk

The B680H has a Hybrid heart which, together with its “everlasting” springs, allows it to exceed 2,000,000 cycles of continuous-use, raising 8 m beams in less than 6 seconds, in total safety, thanks to the reverse on contact feature.

Extreme flexibility and optimisation of logistics.

One single model controls passages with a net width from 2 m to 8 m.

Its modular beams make the B680H a product which is easy to manage and handle.

Full visibility and control of traffic

The programmable integrated flashing traffic light connector guarantees perfect regulation of traffic, while the LED beam lights adequately signal closing of the passage even under conditions of poor visibility.

Switching power supply

The switching power supply, with high energy efficiency and extended range, ensures operation of barriers from 100 Vac to 240 Vac, protecting them from any changes in voltage occurring with non-optimal powersupply systems.

Integrated absolute encoder

Absolute encoder kit for complete control of movement and reversing of beam when an obstacle is detected : this ensures that the impact curve can be respected, ensuring that pedestrian passages also comply with safety standards.

« Everlasting » springs

The springs of the B680H have been designed to exceed 2,000,000 cycles

24V Hybrid heart

The hydraulic pump with brushless motor permits the movement of long or short beams at high speed and continuous cycle (100% duty cycle).

Backup batteries

Installing the XBAT 24 module (high-performance Nickel-Metal Hydride batteries), including battery charger, ensures the operation of the B680H even during a black out.

Integrated flashing traffic light

The flashing traffic light is entirely integrated into the structure, so it cannot be damaged. The operation of its red and green high-efficiency LEDs may be programmed by the board.

Elliptically-profiled modular beams

The longest beams are obtained joining two modules up to a maximum of 8.3 m (a net gate area width of 8 m) to ease transportation. Once the modules have been assembled, the connection joint is invisible and LED lighting may be fixed to the entire length of the bar. All the beams are windproof, round or elliptically profiled and are supplied with rubber protection on the bottom.

Sophisticated electronics with

integrated Loop Detector microprocessor control board ensures integration of the B680H with complex control systems. It has numerous programmable outputs and inputs and a connector for GSM, Ethernet and Wi-Fi modules. Two integrated, high-sensitivity Loop Detectors ensure the containment of system costs.

Removable trunk

The trunk is not a supporting element of the motor column of the barrier and can be easily replaced without disassembling the whole: It is available in stainless steel or steel version with the innovative anticorrosion treatment Primer epoxy galvanization at 100 microns with paint available in four colors.

Easy to assemble: After installing the upright with the flange and beam, simply thread the trunk from above and secure it to the base. For a possible replacement, it is enough to disassemble the fixings and to extract it by the top, without needing to disassemble the whole of the barrier.

Dimensions and Technical specifications

Power supply 100 ÷ 240 Vac 50 (60) Hz

Electric Motor 36 Vdc Brushless

Absorbed power 240 W

Absorbed current 1,1 A/230 V

Motor rotation speed 1.000 ÷ 6.000 rpm

Pump capacity 3,2 l/min (max)

Electronic deceleration Absolute encoder

Temperature -20°C ÷ +55°C

Weight 85 kg (65 kg body + 20 kg compartment)

Oil type FAAC HP OIL

Barrier body treatment Epoxy zinc anti-corrosion treatment

100 microns + paint

Protection level IP56

Type of boom Round or elliptical with lights and rubber edge

Dimensions (LxHxD) (mm) 469x279x1100 (see illustration)